Filling 1 Ton of Bulk Bags is one of the toughest works done for mineral transportation. This is because whenever you are filling the 1 ton bulk bags, you need at most care. The occurrence of accidents and spillage of minerals is high, when you are going to fill the minerals in the bulk bags. One of the easiest ways to avoid these types of challenges and hurdles is by purchasing high quality bulk bags. Plenty of sellers are available in the market, but you need to choose the best one that is offering bulk bags at reasonable rates in higher quality. Here are the common challenges faced while filling the bulk bags.
The Surface Of The Bag
If you are going to fill 1 Ton of Bulk Bags, you need to check the surface of the bag in which the bag is standing. Generally, bulk bags need support in order to carry out the filling process. If you allow your bag to be in the air, the bag may end up leaning over or even falling during the filling process. So before you carry out the filling process, you should check whether the bulk bags are properly mounted on a solid base or not. When you fail to provide solid base support, it may harm employees and cause damage to the machines. Along with the filled materials could be spilled and go to waste.
Use The Right Sealing System
You may be aware that failure in the sealing, leads to spill products in 1 Ton Bags. Whenever you fill the bag that contains poor sealing, you will end up losing the products on the land. Without the proper sealing system, you may not be able to reach the particular destination without spillage of products. It is necessary to use the right sealing system, to avoid the spillage of products on the land. Whenever you are using the right sealing system you should not force the spout in an awkward position. Before you load the products on the forklift, you need to check whether the bag is properly sealed or not. There may be chances for occurrences of spillage when fork lifting the products because of a poor sealing system.
Avoid Over Filling And Over Loading
It is quite common for some workers may overload and overfill their bulk bags in order to carry out the process in a limited amount of time. Though bulk bags can able to withstand overfilling and overloading, they may have a chance for failure in transportation. Apart from overloading, some workers may tend to overfill the bags in terms of their sizes. These types of overfilling and overloading contain risks and cause damage to machines. Along with that, it can also harm the workers and the bulk bags with the product.
Static Charge And Dust Mitigation
Whenever you are filling 1 Ton Bulk Bags, you should know about the products in order to prevent static charge and dust mitigation. The best way to avoid these types of filling processes is by providing the proper ventilation in the Warehouse. Whenever you carry out the filling process, you may also have the risk of dust explosion based on the materials you are dealing with. These are common challenges faced during filling 1 ton bulk bags.
Read More
.jpg)
No comments:
Post a Comment